Filter
Top Products
User instructions
30
3. Description of the controls
3.1 Front panel
All the dishwasher controls are grouped on the front panel.
1 ON/OFF
BUTTON
2 SELECTION PROGRAM
BUTTONS
(P1…P5)
3 ½ LOAD WASH
BUTTON (certain models only)
4 ECO DRYING CYCLE
BUTTON (certain models only)
5 DELAY PROGRAM
BUTTON (certain models only)
6 START/STOP
BUTTON
7 POWER ON
LIGHT
8 PROGRAMS
INDICATOR LIGHTS
9 INFORMATION DISPLAY
10
RECESSED DOOR HANDLE
3.2 Information display
The dishwasher is equipped with a practical
DISPLAY
which
provides information on the programmed dishwasher functions.
LIGHTING
Pressing the
ON/OFF
button
(1)
will start the dishwasher and will lit up the dishwasher pilot light
(7)
. After approximately
3 second
from this operation the
DISPLAY (9)
will be turned on with a
visualization that will depend upon the state of the dishwasher.
PROGRAMMING
In this dishwasher model all the programming operations are possible only with closed door. With
open door, on the
DISPLAY (9)
will appear the symbols
--
and the
PILOT LIGHT PROGRAMS (8)
remains out.
SELECTION PROGRAM
The program selection is possible through the
relative buttons
(2)
.
By pressing the relative button of desired program (see table) it will lid up the relative pilot light to
confirm that the operation did occurred on the
DISPLAY (9)
will appear a program duration
forecasting (“
h.mm
”).