Instructions for the User
34
10.EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to
wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind
are provided below.
Before carrying out any operation involving access to live parts, disconnect the appliance from the
electricity supply.
10.1 Changing the light bulb
Remove the protective cover A by unscrewing it anti-clockwise and replace the bulb B with another of
the same type (25 W). Replace the protective cover A.
Use only light bulbs approved for ovens (T 300°C).
10.2 Removing doors
Lift the levers B and take hold of the two sides of the
door with both hands close to the hinges A.
Raise the door to an angle of about 45° and remove it.
To reassemble, fit the hinges A into their grooves, then
lower the door into place and engage the levers B.
10.3 Removing the gaskets
To allow thorough cleaning of the oven, the door gasket can be removed.
Before removing the gasket, remove the oven door as described above. Once
the door has been removed, lift the tangs at the corners as shown on the right.