Smeg SA130P Oven User Manual


 
Instructions for the User
12
8. ELECTRONIC ANALOGUE CLOCK (ON SOME MODELS ONLY)
LIST OF BUTTON FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
CLOCK ADJUSTMENT AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
8.0.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals.
Press for 1 / 2 seconds to stop the display flashing and start the procedure for setting the correct time.
Press the value modification keys or to increase or decrease the setting by one minute for each
pressure.
Press one of the two value modification keys until the current time appears. 6/7 seconds after the last
key is pressed, the clock will start from the time set.
When the oven is in standby mode, to modify the time simply press the key for about 2 seconds and
adjust the time using the and keys. A few seconds after the last key is pressed, the clock will
restart normal operation.
At the end of each programmed operation 8 beeps will sound 3/4 times at intervals of about 1 and a half
minutes. This sequence can be stopped at any time by pressing any key.
8.0.2 Timer
This function does not stop cooking; it simply activates the buzzer.
Press and the display will light up as shown in figure 1;
Within 6/7 seconds, press the or keys to set the timer. Each time a key is
pressed, 1 outside segment, representing 1 minute of cooking time, will light up or
go out. (figure 2 shows a cooking time of 10 minutes).
6/7 seconds after the last key is pressed, the countdown will start; when it finishes,
the buzzer will sound.
During the countdown, the current time can be viewed by pressing the key
once; press it again to return to the timer display.
At the end of the countdown, the oven must be switched off manually by turning
the thermostat and function selector knob to 0.
The maximum cooking duration that can be set is 60 minutes.
1)
2)