Smeg SA130P Oven User Manual


 
Instructions for the User
10
7. ELECTRONIC PROGRAMMER (ON SOME MODELS ONLY)
LIST OF BUTTON FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
COOKING DURATION BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
MANUAL MODE BUTTON
7.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals, showing . Press to stop the display flashing.
Keep the key pressed and press the value modification keys or within 5 seconds to increase or
decrease the setting by one minute for each pressure.
Press the value modification keys or within 5 seconds to increase or decrease the setting by one
minute for each pressure.
Press one of the two value modification keys until the current time appears.
When the oven is in standby mode, to modify the time simply press the key for a few seconds and set
the time using the and keys.
Before each programmer setting, switch on the function and set the temperature required.
7.2 Semiautomatic cooking
This function only switches the oven off automatically at the end of the cooking time.
Press the key and the display will light up showing the figures ; keep it pressed, and at the
same time use the value modification keys or to set the cooking duration.
A few seconds after the key is released, the count of the programmed cooking duration will start and
the display will show the current time together with the A e symbols.
7.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the key and the display will light up showing the figures ; keep it pressed, and at the
same time use the value modification keys or to set the cooking duration.
Press the key and the display will show the sum of the current time plus the cooking duration just set:
keep it pressed, and at the same time use the value modification keys o to set the cooking end
time.
A few seconds after the key is released, the programmed count will start and the display will show the
current time together with the A symbol. When the cooking start time calculated automatically by the
timer on the basis of the data entered is reached, the display will show the A symbol.