Smeg SC709X Oven User Manual


 
41
Instructions for the user
Once cooking has started the display will show the current time,
represented by the constantly illuminated segments, and the
minutes left to the end of the cooking time, represented by the
flashing segments (each flashing segment means 12 minutes of
cooking time left).
At the end of the cooking time the timer will switch the oven heating
elements off, the beeps will start to sound and the numbers on the
dial will flash.
The duration can also be reset by resetting the program selected:
pressing the central key for 1 or 2 seconds will delete the
duration set and the oven will have to be manually switched off.
Warning: it is not possible to set cooking durations of more than 6
hours.
Cooking start: as well as setting a cooking duration, the cooking start
time can also be set (with a maximum delay of 12 hours in relation to the
current time). To set the cooking start/end time, proceed as follows:
Set the cooking duration as described in the previous point.
Within 6/7 seconds of the last pressure on the or keys, press the
key again to set the cooking start time. The current time will appear on
the display with internal segments illuminated to show the end of cooking
time. Use the and keys to set the cooking start time.
6/7 seconds after the last key is pressed, the display will show the
current time and the cooking start and end times, which will be
represented by the illuminated inside segments. The display
segments will be constantly illuminated as long as the current time is
not the same as the cooking start time; as soon as the current time
reaches the set starting time, all the inside segments will start to
flash, indicating that the oven has started cooking.
At the end of the cooking time the timer will switch the oven heating
elements off, the beeps will start to sound and the numbers on the
dial will flash.
To reset the whole program set, keep the central key pressed for
1 or 2 seconds: if cooking has already started, the oven will have to
be switched off manually.