Filter
Top Products
39
Instructions for the user
3.2 Electronic Analogue Clock
LIST OF FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
CLOCK ADJUSTMENT AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
3.2.1 Setting the time
When the oven is used for the first time, or after an electricity supply
failure, the display flashes at regular intervals. Press
for 1 / 2
seconds to stop the display flashing and start the procedure for setting
the correct time. Press the value modification keys or to increase
or decrease the setting by one minute for each pressure.
Press one of the two value modification keys until the current time
appears. 6/7 seconds after the last key is pressed, the clock will start
from the time set.
At the end of each programmed operation 8 beeps will sound 3/4 times
at intervals of about 1 and a half minutes. This sequence can be
stopped at any time by pressing any key.