Filter
Top Products
Instructions for the user
7
5. ELECTRONIC ANALOGUE CLOCK (ONLY ON SOME MODELS)
The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
MINUTE-MINDER BUTTON
AUTOMATIC LENGTH / SWITCH-OFF TIMING BUTTON
TIME SETTING AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
5.1 Setting the time
When the oven is used for the first time, or after a power blackout, the display flashes on and off at
regular intervals. Press the
key for 1/2 seconds to stop the display flashing and start setting of the
current time. Press the value modification keys
or to increase or decrease by one minute for
each time a key is pressed.
Press one of the two value modification keys until the current time appears. The clock will start from
the time set 6/7 seconds after the last key is pressed.
At the end of each programmed cooking operation, the clock gives 8 beeps, repeated 3/4 times at
intervals of about 1 and a half minutes. The beeps can be stopped at any moment by pressing any
key.
5.2 Minute-minder
This function does not stop cooking but just triggers the beeps.
- When the
key is pressed the display illuminates, appearing as shown in
figure 1;
- Press the
or keys within 6/7 seconds to set the minute-minder.
Whenever a key is pressed, 1 outside segment, representing 1 cooking minute
will light up (figure 2 shows 10 cooking minutes).
1
- The countdown will start 6/7 seconds after the last key is pressed; at the end of
it, you will hear the beeps.
- During cooking with countdown, the current time can be displayed by pressing
the
key once; press again to return to the minute-minder display.
2
- At the end of the countdown, the oven has to be switched off by hand, by
turning the thermostat and the function selector to 0.