Filter
Top Products
INSTALLATION & OPERATIONS MANUAL 1189200 REV 0 (12/06) PAGE 5 OF 24
An optional Programmable Control is also available for the SB-5-ES and SB-10-ES. The
Programmable Control allows you to set and run specific programs as menus complete and total
control of your production program.
A Meat Probe is also available for either Manual or Programmable Control units. The Meat Probe
allows you to use the internal temperature of your product to control the operation of the SB-5-ES
or SB-10-ES. When used with the Hold feature of the Smoker you can load your product in the
morning (or the night before) and not bother with it again until you are ready to use it.
AVAILABILITY FOR TESTING:
A prospective customer may see a unit in operation as follows:
• At an existing installation
• At a dealer's showroom
• At the Southbend manufacturing facility
If contacted, Southbend will provide the information on the nearest location. In the event that a
customer desires to test a unit at his place of business, arrangements can be made based on a
specifically defined program. In the event that a customer wants to try a special product,
arrangements can be made to determine what conditions are necessary for baking so the
customer can determine the suitability for his program.
COMPARISON WITH OTHER UNITS:
Southbend will provide test data or a test unit for the comparison of results with any other unit on
the market; however, Southbend reserves the right to have its designated representatives
available during the test. All results of such comparison tests will be made available to Southbend
and may be used by Southbend. As stated previously, Southbend operating costs compare
favorably with gas convection ovens and our ovens generally do not require hoods. Based on
production of consistent quality products from the Southbend Oven, as well as baking times,
Southbend out-performs the competition.
CONSTRUCTION:
All combination Ovens in this series are constructed of stainless steel inside and outside. All of the
frame members are welded to provide long life construction. Components such as temperature
and humidity controls, timers, switches, motors, heating elements and other such items are
thoroughly tested before shipment. On-going research and development projects are used to
introduce the latest and most dependable parts.
SHIPMENT:
Southbend units are usually shipped directly from the factory or delivered from a dealer, unless
sold at a show or after a test or demonstration. Unless otherwise agreed to by Southbend , freight
is paid by the buyer F.O.B. from the Southbend manufacturing facility in Menominee, Michigan.
Shipping time varies, depending upon the shipping point, the time of year, and shippers used.
Usually Southbend prefers three weeks lead time, but can reduce the time, in some instances, on
an emergency basis.
Southbend employs accepted packaging standards to ensure that your equipment arrives in
excellent condition. However, damage may still occur through negligent handling or accident on
the part of the shipping company. Southbend works closely with all of its customers in tracing
shipments to delivery and to minimize handling.