Filter
Top Products
7
Bow of Vessel Water Flow
Sea Strainer, Mount with
Quick Block
Ventura 150 Deluxe Plumbing
Inlet pump module. Mount vertically as
low as practical, no more than 4’ (1.1 M)
above waterline and not over electrical
equipment.
Leave clearance below for filter change.
5 micron filter. Do
not mount over
electrical equipment.
Leave clearance be-
low for filter change.
Accumulator, Factory pre-charged.
Install and plumb as shown.
Plastic fittings should have 3-4 wraps of Teflon
tape and will thread almost all the way in. Leave
the first pipe thread uncoated. Avoid getting dirt
or debris in the system during assembly. Avoid
tight bends and elbows. Secure piping away from
moving objects and protect from chafe.
Fresh water flush inlet to charcoal filter.
Plumb to fresh water system.
Spectra Clark Pump. Mount in a cool location. May be
oriented in any position and can be well above waterline.
Leave access to the pressure relief valve. Do not mount
over electrical equipment. Use supplied spacers and wash-
ers for the vibration mounts.
Pressure
Relief Valve
Brine Discharge thru hull place
above waterline or tee brine into
another visible drain.
1/2” or 3/4 scoop strainer thru hull and seacock for water maker only. Mount low, in
a clear flow and away from head discharge. Thru hull is shipyard supplied.