Filter
Top Products
Continuous Loss-in-Weight Blenders Chapter 6: Appendix
56
6-2 Addendum (Service Supervisor Information)
Caution! After all selections are made: Keep pressing the “Done” key until the unit
returns to the Recipe menu.
Passwords
• User Password “5413”
• Maintenance Password “3145348”
Caution! Maintenance password should only be supplied to qualified personnel! The
program can be compromised.
Programmable Settings
The Blender software program has been designed to allow some customizing to achieve certain
desired operating parameters. The following is a listing of the selections that are “field”
programmable, followed by the procedure for doing so.
Pressing the manufacturer’s icon when in the “Setup” Directory Screen menu accesses this
menu.
Note: Personnel not extremely familiar with this blender controller should
not use this section of the manual, or program can be compromised!
Note: Hidden, programmable features and hidden menu pages should not
be made available to floor operators. These pages also include the
Service Supervisor Information addendum located in this section.
Unauthorized changes to these factory settings by inexperienced
operators may prevent the unit from operating properly, and may
void part or all of the warranty.
Note: Inexperienced operators or plant personnel should not access
programmable features. Unauthorized changes may prevent the blender
from operating properly and may void part or all of the warranty.
Note: Call the Service Department for assistance or for further explanation of
these or any other programmable features, which may or may not be
shown in this manual.
Note: Information included in this manual is subject to change without notice.