Filter
Top Products
EJ5-615 Chapter 2: Functional Description 14 of 85
Drive
The drive of the rotor runs using an electric motor via V-belts. The motor (mounted on
sliding rails or a motor plate) can be adjusted for regulating the tension of the V-belts
using tensioning screws. The V-belt pulley is attached to the motor shaft with a special
tensioning element.
NOTE: Please observe the operation manual from the manufacturer!
Rotor, Cutters, Bed Cutters
Rotor, cutters, bed cutters
• The material is shredded between the cutters assembled on the rotor and the bed
cutters; they are mounted in a fixed position in the machine lower section.
• All rotors are equipped with square cutters. These cutters make light work of the
heaviest pieces.
NOTE: The cutters have four corners so they can be easily turned once a corner has
worn out.
• The design of the rotor has a significant influence on the quality of the shredding
process and the results. The rotor construction, the type of cutter mounting and
the number of cutters have been matched to the application.
Drive motor