USING THE PROGRAMMER - TOUCH
3.0 FUNCTIONS
3.1 Start of Function
When a function is selected & the time
or acoustic volume is set, the chosen
functionwillstartautomaticallyve
seconds after setting.
The display shows the current TIME of
DAY, except when the MINUTE MINDER is
active. In this case, the display shows the
remaining time of the MINUTE MINDER.
3.2 Power ON/initial operation
After connecting the appliance to the
mains, the display shows the default TIME
of DAY
ashing.
In the event of a power failure, the oven
& grill elements will not automatically
switch on when power is resumed; thus,
on resumption of power, touch any of
the touch control symbols & the display
will show the default time
permanently. The colon & the symbol
continuetoash&thecurrentTIMEof
DAY can now be set.
3.3 Time of Day
Select the TIME of DAY mode by using
the FUNCTION symbol until the
symbol
ashes;settheTIMEofDAYbyusingthe
+ or - symbols.
3.4 Acoustic Signal
Select the ACOUSTIC SIGNAL mode by
using the FUNCTION symbol until the
symbols
or appear on the
display. The signal volume can be set
using the + or - symbols; the acoustic
signal sounds in the selected volume.
ACOUSTICSIGNALvolume:
= low
= medium
= loud
3.5 Minute Minder
Select the MINUTE MINDER mode by
using the FUNCTION symbol until the
MINUTE MINDER symbol
isashing.
The MINUTE MINDER can be set using
the + or - symbols up to a maximum of
.
Five seconds after setting the MINUTE
MINDER, the count down starts in steps of
seconds. The display shows the MINUTE
MINDER symbol
& the remaining time
is displayed continously. While setting
other functions the MINUTE MINDER
counts down in the background.
The remaining time can be changed at
any time by using the + or - symbols.
The countdown is deleted by setting the
MINUTE MINDER to
.
The MINUTE MINDER time has expired
once it reaches
; the MINUTE
MINDER symbol
ashes&the
ACOUSTIC SIGNAL is heard.
Touching any touch control symbol
automatically terminates the MINUTE
MINDER mode.
The ACOUSTIC SIGNAL & the MINUTE
MINDER symbol
are switched off & the
current TIME of DAY is displayed.
3.6 Cooking Time
Select the COOKING TIME mode by using
the FUNCTION symbol until the COOKING
TIME symbol
isashing.The
COOKING TIME can be set using the +
or - symbols up to a maximum COOKING
TIME of
.
Five seconds after setting the COOKING
TIME, the MANUAL mode changes to the
AUTOMATIC mode, the COOKING POT
symbol
& the current TIME of DAY are
displayed.
To change or delete the time, select
COOKING TIME mode until the COOKING
TIME symbol
isashing.Thetime
is changed using the + or - symbols or
deleted by setting it to
.