Filter
Top Products
STOW MS-93 MIXER — OPERATION MANUAL — REV. #5 (03/26/10) — PAGE 31
STOW MS-93 PLASTER/MORTAR MIXER — MAINTENANCE (MIXER)
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper
wheel mounting torque. Be sure to use only the fasteners
matched to the cone angle of the wheel. Proper procedure
for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence. See Figure 34. DO NOT
torque the wheel lug nuts all the way down. Tighten each
lug nut in 3 separate passes as defined by Table 10.
3. After first road use, retorque all lug nuts in sequence.
Check all wheel lug nuts periodically.
Figure 34. Wheel Lug Nuts Tightening Sequence
NEVER! use an pneumatic air gun to
tighten wheel lug nuts.
NOTE
stnemeriuqeReuqroTeriT.01elbaT
eziSleehW ssaPtsriF
SBL-TF
ssaPdnoceS
SBL-TF
ssaPdrihT
SBL-TF
"21 52-02 04-53 56-05
"31 52-02 04-53 56-05
"41 52-02 06-05 021-09
"51 52-02 06-05 021-09
"61 52-02 06-05 021-09