Filter
Top Products
Wine Storage Use & Care 11
subzero.com
Wine Storage
WINE STORAGE SHELVES
All Sub-Zero wine storage models have roller-assembly
shelves with a full three-quarter extension for easy access
to all stored bottles.
IMPORTANT NOTE: Models 424 and 424FS have roller-
assembly shelves in all instances with the exception of the
bottom stationary shelf.
The shelves have a solid natural cherry wood facing that
can be replaced with other wood to match your cabinetry.
Details on how to replace the shelves’ wood facing can be
found in the Sub-Zero design guide. Check our website at
subzero.com or call Sub-Zero at 800-222-7820.
IMPORTANT NOTE: If you choose to stain or seal the
shelves’ natural cherry wood facing, be aware that some
of these substances are hazardous and will damage
stored wine.
Your wine storage unit is intended to maximize the storage
of bottles in an ideal environment where the wine stays in
contact with the cork at an even temperature. Refer to the
illustration for the proper arrangement of bottles on the
shelves.
If you are storing half bottles or magnums, they are
nestled in the shelves in the same manner as the 750 ml
bottles.
WINE STORAGE SHELF REMOVAL
To remove a wine storage shelf, pull the shelf out to its full
extension, gently and evenly lift up on both sides of the
front of the shelf and remove. Refer to the illustration
above. Reverse the procedure to reinstall the shelf.
Wine storage arrangement. Wine storage shelf removal.
Be sure to unload all bottles from the wine storage
shelf before removing it.
When storing magnum bottles you must remove the
shelf just above the intended storage shelf to allow
for these larger bottles to be moved in and out of the
unit. Failure to do so will cause the bottles to break.