Sub-Zero DO30-2F/S-PH DO30PE/S/PH Oven User Manual


 
22
|
Wolf Customer Care 800.222.7820
WOLF CONVECTION STEAM OVEN
RANGES / RANGETOPSVENTILATION COOKTOPS OVENS / WARMING DRAWERSOUTDOOR GRILLS
Planning Information
The convection steam oven can be installed with or without
side trim in a standard or ush inset application. A minimum
base support of 100 lbs
(45 kg) is required. The electrical
supply for the oven must be located in an adjacent cabinet.
The oven has face trim on the top and both sides that will
overlap stiles and rails. Refer to the chart below for trim
overlaps with and without side trim. For ush inset installa-
tions, a minimum
1
/8" (3) reveal is required on all four sides.
The Wolf convection steam oven with side trim is designed
and agency approved for installation with Wolf cooktops,
built-in ovens, microwaves and warming drawers only. If
installed above or below an E series oven in a ush inset
application, a
1
/4" (6) reveal is required.
TRIM OVERLAP
OVERLAP 24" OVEN WITH 30" TRIM
Top
3
/16" (5)
3
/16" (5)
Bottom 0" (0) 0" (0)
Sides
5
/8" (16) 3
13
/16" (97)
ELECTRICAL
ELECTRICAL REQUIREMENTS
Electrical Supply grounded, 240/208 VAC, 60 Hz
Service 20 amp dedicated circuit
Receptacle NEMA 6-20R grounding-type
Power Cord 6'
(1.8 m)