Filter
Top Products
Built-In Refrigeration 27
subzero.com/specs
Dual Installation Kit
INSTALLATION WITH DUAL WIDE GRILLE
This kit will replace the existing grilles that ship with the
units and span the entire width of both units. The kit
includes a 6 mm center trim strip (required for proper
installation of the dual wide grille), heater, dual kickplate
and mounting hardware. Dual wide grilles are available for
all built-in models and design applications. The overlay
dual installation kit with grille will accept overlay and dual
flush inset panels. For dual wide grille panel dimensions,
refer to the panel specifications below for your design
application. Grille panel dimensions listed are for a
standard 2134 mm finished height.
INSTALLATION WITH INDIVIDUAL GRILLES
This kit is available for those who choose to utilize the
individual grilles that ship with each unit. The kit includes a
6 mm filler strip (which fills the reveal between the units
and grilles), heater and mounting hardware. This dual
installation kit is not required if a custom filler strip is used.
The filler strip should be a minimum of 51 mm wide. Refer
to the full-scale template on page 32 for more information.
Dual Wide Grille—Overlay
TWO 762 mm MODELS W H
Overlay Panel 1530 mm 235 mm
Spacer Panel 1508 mm 211 mm
Backer Panel 1524 mm 227 mm
762 mm AND 914 mm MODELS W H
Overlay Panel 1683 mm 235 mm
Spacer Panel 1661 mm 211 mm
Backer Panel 1676 mm 227 mm
TWO 914 mm MODELS W H
Overlay Panel 1835 mm 235 mm
Spacer Panel 1813 mm 211 mm
Backer Panel 1829 mm 227 mm
Dual Wide Grille—Flush Inset
TWO 762 mm MODELS W H
Flush Inset Panel 1556 mm 235 mm
Spacer Panel 1508 mm 211 mm
Backer Panel 1524 mm 227 mm
762 mm AND 914 mm MODELS W H
Flush Inset Panel 1708 mm 235 mm
Spacer Panel 1661 mm 211 mm
Backer Panel 1676 mm 227 mm
TWO 914 mm MODELS W H
Flush Inset Panel 1861 mm 235 mm
Spacer Panel 1813 mm 211 mm
Backer Panel 1829 mm 227 mm