Filter
Top Products
21
cleaning the tray
1. Firstly
, open the front door where
you see a small lip on the right-hand
side. Pull the door towards you until
completely open.
2.
Then, to remove the ice-tray from its
tting, take it by the right-hand side
and at the same time, pull it down
and towards you. Finally
, pull it out by
the centre, keeping it horizontal.
3.
T
o replace the ice-tray in the Smart
Fill Ice Factory, align the short sides
with the lateral ttings and push it
until it’s completely inserted.
4.
Afterwards, push the tray by the
right-hand side until you hear a click,
which will ensure the tray securely in
place while working.
5.
Close the lid of the Smart Fill Ice
Factory
. Your device will be ready for
use once again.
i
mportant:
Use t
epid water to remove residual ice which will form with
regular use of the Smart Fill Ice Factory. This residue could form on the
lid you use to ll the water cylinder, the cylinder valve, and the ice-box,
thus affecting the working of different parts of the system.
Don’t use ice-picks, forks, or knives to remove the residual ice as to do
so could damage the Smart Fill Ice Factory.