Summit ALF-620 Freezer User Manual


 
Felix Storch, Inc.
SUMMIT APPLIANCE DIV.
Page 9
IF YOUR MODEL HAS A FRONT LOCK (SELECTED MODELS)
Your lock has a feature called automatic key eject. To lock or unlock the appliance, you must push and hold the key in the lock
while turning. The lock is spring loaded, so the key cannot be left in the lock.
If the key is lost, contact your dealer or SUMMIT APPLIANCE to purchase a replacement. Always give the model and serial
number of your appliance when requesting a replacement key. Keys for most models can be ordered online at
www.summitapplianceparts.com
NEVER KEEP KEYS WITHIN THE REACH OF CHILDREN
KEYPAD LOCK (optional on most models)
Factory set default password: The factory set default password is 0123. If the default password is lost,
press the key (located inside the battery box) for 30 seconds then wait for the warning sound which
signifies the factory set default password has been restored.
To set the password:
While door is open press the key (located inside the battery box) until it jingles,
enter the 0123 password then # within 10 seconds to confirm. Enter the password (1-16 digits) then press #
again to confirm. A total of 10 passwords can be set. Note: each password starts from the number 0 to 9 in order. The first
password starting with 0 is the default password. For example, use 1xxx, then 2xxx etc. for 10 users.
Changing password:
While the door is open, press the key (located inside the battery box) until it jingles, enter the old
password and press # within 10 seconds to confirm. Enter new password then press # to confirm. Note: the first digit cannot be
changed.
To open the door
: While the door is closed, press the key, enter the password then press again to confirm.
To lock door manually
: Press #.
Function setting of automatic lock:
To set the auto-lock to lock on a preset time interval press the key (inside the battery
box); enter a number (the time interval in seconds from 10-99) then press # to confirm. The auto-lock time can be set between
10-99 seconds after opening the door. If the time is set less than 10 seconds, the door will not lock automatically, only manually.
Deleting the door-opening passwords:
Press the key, enter default password followed by 0000, then press # and all the
door-opening passwords will be deleted except for the default password.
Note: To access the battery box you need to remove only the two small screws, on the top and bottom of that cover. Do not
remove the 4 screws holding the keypad and cover to the appliance door.