Elih3
OPERATING INSTRUCTIONS
PREPARING TO USE YOUR PIZZA OVEN FOR THE FIRST TIME
If you are using your Pizza Oven for the first time, make sure you:
• Remove any stickers (if any) from the surface of the Pizza Oven.
(Do not try to remove Caution labels.)
• Pull-out Pizza Oven, Removable Wire Rack and remove all packing material,
printed documents and paper from inside the Pizza Oven.
• Clean the Removable Wire Rack and Removable Crumb Tray with warm
water, a small amount of dishwashing liquid and a non-abrasive sponge or
cleaning pad. Insert rack inside grooves on both sides of the interior wall.
Replace Crumb Tray. (Do not operate unit without Crumb Tray in place.)
DO NOT IMMERSE THE BODY OF THE UNIT IN WATER.
• Dry the parts thoroughly before using.
• Select a location for the Pizza Oven. The location should be an open area
on a flat counter where the plug will reach an outlet.
• Plug the Pizza Oven into a 120 Volt 60 Hz AC electrical outlet.
W
ARNING
:
When Pizza Oven is in use or cooling down,
please make sure there is a 6-inch clearance between the Pizza
Oven and any other surface including cords. Make sure the
cord is not resting against the back of the Pizza Oven.
• To use the Folding Handle, place in “Up” position for
storage and “Down” position for use. (See Figure A)
P
LEASE
N
OTE
:
• We suggest that you begin by baking frozen pizza until you become familiar
with the OSTER
®
Pizza Oven. Most 12-inch frozen pizzas will take between
10 and 15 minutes to cook properly in the OSTER
®
Pizza Oven. Times can vary
greatly due to pizza type, size, thickness and toppings. The OSTER
®
Pizza Oven
comes with a timer that can be set up to 15 minutes. However, to avoid over-cooking,
begin by baking in two steps with a quick look in between. When you are familiar
with how long your favorite pizza takes to bake to your liking, you can simply
set the timer for the total time and bake in one step.
Never thaw frozen pizza
before baking. Your Pizza Oven is designed to bake at 450°F.
USING YOUR OSTER
®
PIZZA OVEN
C
AUTION
:
The appliance must be operated on a flat surface and away from walls
and corners. The oven will get very hot during use. Use handle or knob only, and
do not cover the appliance or place any items on the top of the Pizza Oven.
1. Plug the Pizza Oven’s power cord into the wall outlet.
2. Turn power on and allow the Pizza Oven to pre-heat by rotating the
Timer Control Knob clockwise to 3 minutes. When the Timer Control Knob
reaches the Off/O position, the Power Light Indicator and Pizza Oven
will turn off with a bell (“ding”) signal.
3. Pull out the Removable Wire Rack using the Cool-Touch™ Folding Handle.
Put the frozen pizza on the middle of the rack surface and slide it back
into the Pizza Oven. The raised “bumps” along the sides and front of
the Wire Rack are to help stabilize the pizza during handling.
FIGURE A