Filter
Top Products
4
Wash the glass jug, quad-blades, anti-spill
cover and whisk in warm soapy water. Rinse
well and dry thoroughly.
Using the Quad-Blade Attachment
1. Place the non-slip pad on a flat level
surface and position the glass jug on
top of it.
NOTE: Do not operate the appliance without
the non-slip pad.
2. Place the lower blade over the shaft in the
centre of the glass jug. See Figure 1.
3. Position the upper blade on top of the
lower blade. See Figure 2.
NOTE: Whether the upper blade is used will
depend on the chopping task.
4. Place the food items to be chopped inside
the glass jug. Large portions should be
cut into small pieces before chopping,
approximately 3cm cubes.
NOTE: Do not operate the appliance when the
jug is empty.
5. Place the anti-spill cover inside the rim
of the glass bowl, aligning the ridges in
the rim with the indents in the cover. The
cover should click securely inside the rim
when correctly positioned. See Figure 3.
NOTE: Do not operate the appliance if the
cover is not fitted securely inside the rim of
the glass jug.
6. Place the motor housing on top of the
anti-spill cover. The motor housing will fit
securely if correctly positioned. See
Figure 4.
Using your MultiChopper Plus
Figure 1
Figure 2
Figure 3
Figure 4