Filter
Top Products
8
Care and Cleaning
DuPont Teflon
®
Platinum Pro
™
Professional Use
Non-stick Coating
Your Café Press features a special scratch
and abrasive-resistant non-stick coating that
makes it safe to use metal utensils when
cooking.
Sunbeam recommends that care is taken with
the non-stick coating particularly when using
metal utensils.
Do not use sharp objects or cut food on top of
the Café Press.
Sunbeam will not be liable for damage to the
non-stick coating where metal utensils have
been misused.
Always turn the power OFF and unplug the
Café Press from the power outlet before
cleaning.
When cleaning the non-stick coating do
not use metal (or other abrasive) scourers.
After cleaning, dry the Café Press and lid
thoroughly with a soft cloth before storing.
Quick cleaning method
Note: Always turn the power OFF and unplug
the Café Press from the power outlet after
use and before cleaning.
The cooking plates are coated with a durable
high grade non-stick surface, therefore little
cleaning is required.
Note: Always allow the press to cool until just
warm after use and before cleaning.
Once cooled, simply wipe the cooking plates
with a damp, soft cloth or soft washing
sponge to remove any cooking residues.
The press is easier to clean when
slightly warm.
Do not immerse your Café Press in water or any
other liquid. Do not use abrasive scouring pads
or powders.
Do not place your Café Press in a dishwasher.
Always clean after each use to prevent a build
up of cooking residue on the grill.
To clean the exterior
Wipe over with a damp, soft cloth. If
required, you may use a small amount of
mild detergent dissolved in warm water. Do
not use steel wool, scouring pads or abrasive
cleaners as these will scratch the surface.
Polish with a dry, soft cloth.
Storage
Always turn the power OFF, unplug your
Café Press from the power outlet and allow
it to cool after use. Always clean your Café
Press after each use and before storing it
away.
Bring the plates together and use the locking
mechanism on the side arm to secure the
plates. Take hold of the dial and turn
anti-clockwise until it locks into position.
Wrap the cord underneath the unit.
Store on a flat, dry surface, or in a
convenient upright position in cupboards,
shelves or on the bench top.