Filter
Top Products
10
FOR CONTROLLED CYCLE OPERATION
Select the “High” or “Low” setting, rest hand on container and activate the Blender for
about 2 seconds. Repeat this procedure for as many cycles as required by the recipe.
(See this Page or Page 7 or 8 for detailed instructions for controlled cycle operation
of the specific Blender you own.)
FOR CONTINUOUS OPERATION
Select the “High” or “Low” setting, adjusting desired speed, and then turn Blender on to
begin processing. When processing is completed, turn Blender off.
(See this Page or Page 7
or 8 for detailed instructions for controlled cycle operation of the specific Blender you own.)
C
AUTION
:
NEVER LEAVE BLENDER WHILE IT IS PROCESSING. If container should turn
while motor is on, switch it OFF immediately and tighten jar in container. (See Page 5,
Tightening the Container.)
ATTENTION!
PLEASE NOTE IMPORTANT PRODUCT INFORMATION
EASY CLEAN Button
1. Pour 3 cups of warm water in the Blender jar.
2. Add 1 – 2 drops of liquid dishwashing detergent.
3. Push the EASY CLEAN button.
4. Let Blender run for 10 – 15 seconds.
5. Empty jar of soapy water into your sink.
6. Rinse jar thoroughly with clean water.
N
OTE
:
The EASY CLEAN Feature is not a substitute to regular cleaning as described in
the Instruction Manual. The EASY CLEAN Feature should only be used to clean the
Blender between batches of the same food. When changing food types or when
finished blending altogether, the Blender should be disassembled and thoroughly
cleaned as indicated in the Instruction Manual. It is especially important to
disassemble and thoroughly clean your Blender when processing
perishable foods such as milk, other dairy products, meats,
seafood and eggs.