Filter
Top Products
8
12-SPEED
Low speeds are Stir, Purée,Cream, Chop, Whip, and Mix.
High speeds are Grate, Blend, Shred, Grind, Liquefy, and Ice Crush.
FOR CONTINUOUS OPERATION
Determine whether you want to use “High” or “Low” continuous cycling. Slide the
“High” or “Low” switch to “High” or “Low”, rest hand on top of container and then
push desired “speed” button. Press “Off” to turn Blender off.
FOR CONTROLLED CYCLE OPERATIONS
Determine whether you want to use “High” or “Low” controlled cycle operation.
Slide the “High” or “Low” switch to “High” or “Low”. Rest hand on top of container
and push “Pulse” button. Hold button down for about 2 seconds, then release and
allow the blades to coast to a stop. Repeat cycles specified in recipe. Release of
“Pulse” button turns the Blender off.
N
OTE
:
Pulse button can be held for longer than 2 seconds as needed.
14-SPEED
Low speeds are Stir, Beat, Purée,Cream, Chop, Whip, and Mix.
High speeds are Mince, Grate, Blend, Shred, Grind, Liquefy, and Ice Crush.
FOR CONTINUOUS OPERATION
Determine whether you want to use “High” or “Low” continuous cycling. Slide the “High”
or “Low” switch to “High” or “Low”, rest hand on top of container and then push desired
“speed” button. All speed buttons are continuous speed buttons except for Ice,
Crush and Mix. Press “Off” to turn Blender off.
FOR CONTROLLED CYCLE BLENDING OPERATIONS
The “Ice Crush” (high) and the “Mix” (low) buttons are controlled cycle operations.
To use, determine whether you want to use “High” or “Low” controlled cycle operation.
Press “High” or “Low” button accordingly. Rest hand on top of container and then push
button labeled “Ice Crush” (high)/“Mix” (low)/“Pulse”. Hold button down for about
2 seconds, then release and allow blades to coast to a stop. Repeat cycles until contents
reach desired consistency. Release of “Pulse” button turns the Blender off.
N
OTE
:
Pulse button can be held for longer than 2 seconds as needed.
TO PROCESS FOOD
• Assemble container (See Page 5, Assembling Your Blender).
• Put ingredients into Blender container, cover firmly, and place container into ring
on motor base. (See Page 5, Tightening the Container.)