Filter
Top Products
5
1. Place the blender jug onto the motor base.
Note: Do not switch ‘ON’ the MultiBlender
Electronic without the lid in position.
2. Place ingredients into the glass jug. Do
not exceed the maximum indicated level –
1.5 litres.
3. Position the lid with ingredient cup onto
the blender jug. Ensure the lid is firmly in
place.
4. Using the control panel, select the desired
function, either from the pre-programmed
functions or the manual buttons High,
Low and PULSE settings.
The Blending Guide on page 6 shows
various functions that can be performed
and the suggested speeds to use.
Note: Although the lid fits firmly to the
glass jug, we advise when blending liquid
ingredients, to place your hand on the lid
as you initially select the blending
speed/function. As the powerfull 650 watt
motor could cause the liquid to surge up
causing leakage. Once you have started
blending you can remove your hand.
Further ingredients can also be added
whilst blending by removing the ingredient
cup and pouring ingredients through the
hole in the lid.
Note: The pre-programmed functions can
be stopped by simply pressing the ‘OFF’
button.
5. If using the manual buttons, Low or High,
once you have completed blending, press
the ‘OFF’ button on the control panel.
Note: When removing the six-blade
assembly from the glass jug you may need
to slightly tilt the blade so that it slides
out easily. You shouldn’t force the blades
out of the glass jug as this will ultimately
damage the blades.
Using your MultiBlender Electronic