Filter
Top Products
Oven Cleaning
(continued)
[!Ir_[P_IT_ use care when opening
the oven door after the self-cleaning
cycle. Stand to the side of the oven
when opening the door to allow hot air
or steam to escape.
f
I
Q • g oven • g
_rod _!_an 0 preheat
Q lock .....
J
To Start the Self-Clean Cycle
*We recommend a 2 hour self-clean cycle for light soils and a 3 hour cycle for
average to heavy soils (to assure satisfactory results).
To Set the Controls for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day.
2. Push _f_n., "appears in the display.
3. Push the unt "3 00" appears n the d sp ay for a 3 hour cycle, or push
the until '2:00" appears in the display for a 2 hour cycle.
4. As soon as the or is released, 'CLn' appears in the display.
5. As soon as the controls are set, the motor driven lock will begin to close
automatically and the "LOCK" indicator light will flash. DO NOT open the
door while the light isflashing (it takes about 15 seconds for the lock to
close).
6. The %OCK' light will glow until the cleaning cycle iscompleted or cancelled.
and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day will appear in the display window and the 'LOCK' light will
continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the'LOCK' light has
gone out, the oven door can be opened.
11_ DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution when opening the door after the
self-cleaning cycle is completed. The oven may still be VERY HOT.
14