Filter
Top Products
Control Pad Functions READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various functions of the
CLEAR PAD-- Used to oven as described below.
clear any function CLOCK PAD-- Used
eP_Vptt_Y ;nter_ day UP and DOWN ARROW PADS-- Used along with the / to set the t,me of
and minute timer. Push function pads to select oven temperature, cooking /oay.
CLEAR to sto_l_cookm." cl time, stop time (when programming an automat c / _FEATURE
stop time), time of day, clean time and minute timer/ /INDICATOR
BAKE PAD--Used to ___ _ ___ / LIGHTS-- These
enter the normal_, f _ / _ light to show which
baking mode _ _ • "_ --i \ • / I_ feature is in use.
temperature. _, , II _ _/ ,'__,
e _,,.t. bake
BROIL PAD-- _ .... II II .......... Used to enter the
Used to select_ • • • oven • • length of the
the variable
broil function.
CLEAN PAD--
Used to select the
self-cleaning
cycle.
• preheat
_ lock .......
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN"
light will glow each time the oven unit turns on to
maintain the set oven temperature, The "PREHEAT"
light will glow when the oven is first set to operate,
or if the desired temperature is reset higher than
the actual oven temperature. The "LOCK" light will
flash until the door locks when the self-clean cycle
is in use. It glows constantly after the door locks.
TIMER PAD--
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
baking time.
--'-_-STOP TIME PAD--
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
The oven can be
• Bake normally
• Time bake
• Broil
• Self-clean
programmed to:
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed, if desired, the controls can be programmed
for silent operation. Push and hold i_. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pushed. To return the sound, push and hold _ again for 7 seconds until 1 beep is heard.
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control isset to operate in °F (Fahrenheit) when shipped from the factory. The oven can be program med
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push broil. • " appears in the display.
2. Push and hold the A until 'HI" appears in the display.
3. Pushand hold broiluntil °F or °Cappears in the display,
4. Pushthe ^ or v to change °Fto°Cor°Cto°F.
5. Pushany function pad to return to normal operating mode,