Filter
Top Products
11
Models 904/906
Troubleshooting Guide
PROBLEM
PROBABLE CAUSE REMEDY PAGE
REF.
6. The unit takes too l ong to
heat or cook.
a. Insufficient voltage. a. Contact service technician. -- --
b. Incorrect voltage supply or the
outlet is not on a dedicated
circuit.
b. Place the unit on a dedicated
circuit with the correct voltage.
1
c. The blower motor is faulty. c. Contact a service technician
to replace the blower.
-- --
d. The temperature dial is not set
properly.
d. Adjust the temperature dial to
the desired setting.
5
e. The heater element is
damaged.
e. Contact service technician. -- --
f. The oven door is out of
adjustment.
f. Adjust the door. 7
g. The door gasket is worn. g. Replace the gasket. 6
7. The unit is on. The blower,
carousel and heaters are
on, but the heat light does
not illuminate.
a. The heat light is defective. a. Contact a service technician
to replace the light.
-- --
8. The door gasket has
deteriorated.
a. Improper use of cleaning
solution.
a. Minimize the exposure of the
gasket to cleaning solutions.
Follow “Cleaning” procedures
in this manual.
8
b. Improper door adjustment. b. Adjust the door. 7