Taylor 162 Freezer User Manual


 
26
Models 150, 152, 162, 168Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
9. The unit goes out on
overload excessively.
a. There are too many
appliances plugged into
the circuit.
a. A separate 20 amp.
circuit is needed for the
freezer to operate
properly.
---
b. An extension cord has
been placed between the
power cord and the wall
receptacle.
b. If the extension cord i s
used, it must match the
power cord in size of
circuit ampacity.
---
10. M odels 162 and 168:
Mix from one freezing
cylinder bleeds over to the
second cylinder.
a. The center draw valve
seal is worn, or is
improperly lubricated.
a. Lubricate properly and
replace seal every 3
months.
15 / 27