Filter
Top Products
12
Model C707Important: To the Operator
060518
AUTO Key
When the AUTO key is pressed, the light comes on.
This indicates that the main refrigeration system has
been activated. In the A UTO mode, the WASH or
STANDBY functions are automatically cancelled. The
MIX REF function is automatically loc ked in to
maintain the mix in the mix hopper.
Note: An indicating light and an audible tone will
sound whenever a mode of operation has been
pressed. To cancel any function, press the key again.
The light and mode of operation will shut off.
Beater Motor Reset Button
The reset button is located on the left side of the unit.
The reset protects the beater motor from an overload
condition. If an overload occurs, the reset mechanism
will trip. To properly reset the freezer, press the AUTO
key to cancel the cycle. Turn the power switch to the
OFF position. Press the reset button firmly.
Do not use metal objects to press the r eset
button. Failure to follow this instruction may
result in electrocution.
T urn the power switch to the ON position. Press the
W ASH key and observe the freezer’s performance.
Open the side access panel. Make sure the beater
motor is turning the drive shaft in a clockwise direction
(from the operator end) without binding.
If the beater motor is turning pr operly, press the WASH
key to cancel the cycle. Press the AUTO key to resume
normal operation. If the freezer shuts down again,
contact a service technician.
Adjustable Draw Handle
The Model C707 features an adjustable draw handle
to provide the best portion control. The draw handle
should be adjusted to provide a flow rate of 5 to 7--1/2
oz. of p roduct per 10 seconds. To INCREASE the flow
rate, turn the screw CLOCKWISE. Turn the screw
COUNTER--CLOCKWISE to DECREASE the flow
rate.
Figure 1