Filter
Top Products
35
Models C708 & C716 Operating Procedures
Model C708 Freezer Door Assembly (Cont'd.)
Step 5
Insert the baffle rod through the beater in the
freezing cylinder. With the door s eated on the
freezer studs, install the handscrews, with the longer
ones on top. Tighten equally in a criss-cross pattern
to insure the door is snug. (See Figure 22.)
Figure 2 2
Step 6
Slide the fork of the draw handle into the slot of the
draw valve. Secure with pivot pin. (See Figure 23.)
Figure 2 3
Note: The C708 features an adjustable draw handle
to provide portion control, giving a better consistent
quality to your product and controlling costs.
The draw handle should b e adjusted to provide a
flow rate of 5 to 7-1/2 oz. (142 g. to 213 g.) of
product by weight per 10 seconds. To INCREASE
the flow rate, turn the adjustment screw
CLOCKWISE. Turn the adjustment screw
COUNTER-CLOCKWISE to DECREASE the flow
rate.
Step 7
Slide the two d rip pans into the holes in the l eft and
rear panels. (See Figure 28.)
Figure 2 4
Step 8
Install the front drip tray and splash s hield under the
door spout. (See Figure 29.)
Figure 2 5