Filter
Top Products
50
Models C708 & C716Important: Operator Checklist
080222
j 7. If your machine is w ater cooled, check the
water lines for kinks or leaks. Kinks can occur
when the machine is moved back and f orth for
cleaning or maintenance purposes.
Deteriorated or cracked water lines should b e
replaced only by an authorized Taylor
distributor.
Winter Storage
If the p lace of bus iness i s to be c losed dur ing t he
winter months, it is important to protect the freezer
by following certain precautions, particularly if the
building is s ubject to freezing conditions.
Disconnect the freezer from the main power source
to prevent possible electrical damage.
On water cooled freezers, disconnect the water
supply. Relieve pressure on the spring in t he wat er
valve. Use air pressure on the outlet side t o blow out
any water remaining in the condenser. This is
extremely important. Failure to follow this
procedure may cause s evere and costly damage to
the refrigeration system.
Your local Taylor Distributor can perform this winter
storage service for you.
Wrap detachable parts of the freezer such as
beater, blades, drive shaft, and freezer door, and
place them in a protected dry p lace. Rubber trim
parts and gaskets can be protected by wrapping
them with moisture-proof paper. All parts should b e
thoroughly cleaned of dried mix or lubrication which
attract mice and ot her v ermin.
It is recommended that an authorized service
technician perform winter storage draining, to insure
all water has been removed. This will guard against
freezing and rupturing of the components.