Filter
Top Products
ENGLISH
4
5
6
7
Use of the various elements
Single bowl model
• Place the food in the bowl.
• If you wish to cook different types of
food at the same time, you can use the
food separator (depending on model).
Place it in the centre of the bowl - Fig. 4
Put the food into each compartment.
• Place the bowl onto the juice collector.
Model with more than one bowl.
The bowls and grids can be assembled in
any order.
• Place the food in the bowls. We recom-
mend that you put the largest pieces of
food, requiring the longest cooking
time, in the lowest bowl.
• Place the bowls onto the juice collector.
▲
Use of several steam bowls at the same
time
• It is possible to put different food items
in each bowl, but make sure that their
flavours complement each other.
• It is also possible (depending on
model) to put the juice tray / separator
between the bowls. This avoids mixing
the cooking juices from each bowl. In
this way you can cook different items
of food whilst conserving their flavour.
• If you are cooking food with different
cooking times, start cooking in the
lower bowl with the food requiring a
longer cooking time. When the timer
reaches the setting for cooking the food
which requires a shorter cooking time,
remove the lid using a cloth, and put
the higher bowl in position. Close and
continue cooking.
Use of removable grids - Fig. 5
• The bowls are fitted with removable
grids which increase the volume of the
cooking area and can be used to cook
large items of food (whole chickens,
kebabs, artichokes, lobsters, etc.
To put the grids in position - Fig. 6
• Take the grid the right way up (clip fa-
cing downwards).
• Place the grid in the bowl.
• Press in the clip area to clip-on onto the
bowl.
To remove the grids - Fig. 7
• To unclip the grid, press on the top from
the outside.
Caution: the bowl placed on the juice
collector must always have its grid fit-
ted.
▲
▲
▲
5060382-Vitasaveur700 H-A-D-S-N 16/03/01 16:19 Page 13