Filter
Top Products
274
REFRIGERATION 48-INCH SIDE-BY-SIDE REFRIGERATOR
Models: KBUIT4855E, KBUIT4865E, KBUDT4855E, KBUDT4865E, KBUIT4875E, KBUDT4875E
SPECIFICATIONS
Total Capacity (cu. ft.) 29.6
Refrigerator Capacity (cu. ft.) 18.8
Freezer Capacity (cu. ft.) 10.8
Product Width 47"
Product Height 83
1
/8"
Product Depth 25"
Cutout Width 47
1
/2" – 47
3
/4"
Cutout Height (Min–Max) 83
1
/2" – 84
3
/8"
Cutout Depth 24"
Energy Consumption
657 kWh with Dispenser
580 kWh without Dispenser
Electrical Supply 115V / 60Hz / 6.9 Amp
Power Cord Included 120V-3 prong
Shipping Weight (lbs.) 573 – 613
Stainless steel side-by-side
with internal ice maker.
KBUIT4855E
Masterpiece® Handles
KBUIT4865E
Professional Series handles
Stainless steel side-by-side
with full-filtered external
ice and water dispenser.
KBUDT4855E
Masterpiece® Handles
KBUDT4865E
Professional Series handles
Custom panel side-by-side
with internal ice maker.
KBUIT4875E
Masterpiece® and
Professional Series Handles
can be ordered separately.
Custom panel side-by-side
with full-filtered external
ice and water dispenser.
KBUDT4875E
Masterpiece® and
Professional Series Handles
can be ordered separately.
INSTALLATION OPTIONS
Specifications in the planning pages provide dimensions and installation
detail for the stainless steel models as well as installation detail for the
custom panel series.
CUSTOM PANELS
The custom panel series features factory-installed, traditional style
trim to provide a “framed” look. This series requires the installation of
custom panels that are not included. You will need to create the panels
yourself or consult a qualified cabinetmaker or carpenter. See dimension
drawings on pages 264-271 for panel specifications.
On the custom panel series, you can create a “frameless” look using
full-overlay custom panels. You will need to order a Trimless Trim Kit
(TRIMKITSXS). This accessory kit contains parts to replace the factory
trim. Full-overlay custom panels and handles are required but not
included in the accessory kit. Create the panels according to the
specifications in the “Full-Overlay Custom Panels” section. You can
order a set of Thermador’s handles or select handles from another
source. For door clearances, see “Handle and Door Clearances for
Custom Panel Series.”
SIDE PANELS
Custom side panels may be needed when not enough space is
available to have cabinets on both sides of the refrigerator or when
the refrigerator is placed at the end of a cabinet run. For the stainless
steel models, you may choose an Inset, Flush, or Recessed Inset panel
installation. For the custom panel series, you may choose an Inset or
Recessed Inset panel installation.
All refrigerators are UL and CUL approved.