Filter
Top Products
265
1.800.735.4328 | THERMADOR.COM
REFRIGERATION — SIDE-BY-SIDE
SIDE-BY-SIDE CUSTOM PANELS
TOP GRILLE PANEL – ROUTING REqUIREMENTS
Top and bottom edges of the top panel should be edge routed
1
/2" (1.3 cm) and
3
/8" (9.5 mm), respectively. Both ends should be
edge routed
7
/8" (2.2 cm) as shown.
DOOR PANELS – ROUTING REqUIREMENTS
If an extended handle kit is used (EXTHANDSXS), then routing
the handle side of the panels is not required.
If the standard handle is used, route the entire handle side of
both panels 3
1
/4" (8.25 cm) to allow for finger clearance. Then
route the other sides 1" (2.54 cm).
"
(6.35 mm)
max.
"
(2.2 cm)
Top
Grille
"
(6.35 mm)
max.
"
(2.2 cm)
Top
Grille
2" (5 cm)
min.
" (6.35 mm) max.
3"
(8.25 cm)
min.
Door
Panel
Handle
1"
(2.54 cm)
Door
Panel
Hinge Side
" (1.3 cm)
min.
"
(6.35 mm)
max.
le
n
a
P
"
(1.3 cm)
min.
"
(6.35 mm) max.
To
p
Bottom
"
(9.5 mm)
min.
"
(6.35 mm) max.
Center face
detail between
offsets
STANDARD HANDLE – TOP VIEW
DOOR PANEL - SIDE VIEW
NOTE: When creating a panel with face detail, the offsets will be
hidden and must be accounted for in order to center the detail in
the top grille.