32
Cleaning and Maintenance
Cleaning
Self-Clean During Self-Clean, the oven is heated to a very high temperature. Soil is burned off
at this temperature.
ATTENTION: Wipe out excessive spillage before self-cleaning the oven.
ATTENTION: Do not clean parts or accessories in the Self-Clean oven.
To set the Self-Clean mode:
1. Press SELF CLEAN.
2. Press COOK TIME.
The Cook Time symbol and the default time appear:
3. Depending on the soil level, you can change the length of the Self-Clean mode
(1:30-2:30 hours). To change the cleaning time to 2 hours and 15 minutes
(2:15), press 2 1 5.
4. Press START.
Self-Clean starts.
The oven is locked during self-cleaning mode. The
2 symbol appears in the dis-
play. You will only be able to open the oven door when the
2 symbol disappears.
Press PAUSE/STOP once to pause Self-Clean. Press twice to stop Self-Clean.
Once the oven has cooled, wipe out the remaining ash with a wet towel.
Note:
• You cannot turn on the oven light during self-cleaning.
• The special heat-resistant enamel and the polished components in the oven
can become discolored over time. This is normal and does not affect operation.
Under no circumstances should you try treating discolorations with scouring
pads or abrasive cleaners.
Avoid These Cleaners Do not use commercial oven cleaners such as Easy Off®. They may damage the
oven finish or parts.
Never use scouring pads or abrasive cleaners.
:
QQ EP
am
1
:
WEP
Self-clean
Set
Self-clean time