Filter
Top Products
English 9
Removing Packaging
• Cut straps on outside of box.
• Remove cardboard box.
• Remove all top and side cardboard and Styrofoam
braces.
• Place oven in front of cabinets where it is to be
installed.
• Unscrew unit from Left and Right Brackets as show in
“Left and Right Packaging Bracket Removal.”
Left Packaging Bracket Removal
Right Packaging Bracket Removal
Note:
Different models use different packaging materials. Actual
brackets may look differently. Bracket remains in packaging
base. Unit should stay on packaging base until ready to be
lifted into cabinet cutout.
27
1
/16"
(687mm)
29
1
/16"
(738mm)
24
7
/16"
(621mm)
36"
(914mm)
Note: Dimensions based on standard countertop height (36" with 4
3
/4" toe kick
including base plate).
T
he built-in oven can be installed below the induction cooktop as long as there
is an air clearance of 1" between the bottom of the cooktop and the top of the oven.
SUMP
4
3
/16"
(106mm)
3
1
/8"
(79mm)
1
1
/16"
(27mm)
4"
(102mm)
6
3
/4"
(172mm)
2
3
/4"
(70mm)
4
3
/4"
(121mm)
Fitting/
Conduit
Heat shield: Self positioning – 2
3
/8" length,
Minimum required air clearance: 1" (26mm)
TOE KICKTOE KICK
COOKTOP
OVEN
COUNTERTOP
3"(76mm)
28
1
/4"
(718mm)
30” Units - under induction cooktop