Filter
Top Products
Page 5
CLEANING
INSTRUCTIONS
Be sure lights are cool
before cleaning the hood.
To Clean Filter/s
It is recommended that the
filters be washed at least once a
month; they can be washed by
hand or in the dishwasher.
Drain water through holes and
along filter edges and allow to
dry thoroughly before replacing
it.
To Clean Hood Surface
For general care, wipe the
outside of the stainless steel,
white, black or glass hood with
sudsy water or household
cleaners such as Fantastic
®
or
Formula 409
®
, rinse well and dry
with clean
soft
cloth to avoid
water marks.
Wipe and dry brushed stainless
steel in the same direction as the
grain.
Do not use abrasive products.
To remove finger prints and give
added shine use spray cleaners
such as Stainless Steel Magic
®
and Shimmer
®
FILTERS
The metal grease filters are made of
anodized aluminum and are long
lasting.
To Remove The Metal Grease
Filter/s
Turn blower and lights off.
For Models HNI, HTNI
Push each handle in the
direction of the arrows as shown
in Fig. 2.
To Replace The Metal Grease
Filter/s
Reverse procedure.
Fig. 2