Filter
Top Products
Page 6
Fig. 4
LIGHTS
NOTE: Turn blower and lights
off. Make sure the lights are
cool. If new lights do not operate:
verify lights are inserted correctly
before calling service.
Replace Lights For Model HTNI
(Fig. 3)
Remove the damaged light and
replace with a new halogen light
Type MR16, 12 Volt, 20 Watt
maximum.
When installing the new light be
sure that the two prongs of the
light fit perfectly into the two
sockets of the lightholder. Press
in firmly.
Replace Lights For Model HNI
(Fig. 4)
Remove lens cover by removing
screw and pulling cover down.
Pull out flourescent tube and
replace with Philips Type
PL-S 9 Watt maximum.
Replace cover and secure with
screw.
Fig. 3