Filter
Top Products
THE FOODSAVER USER MANUAL
23
How to Vacuum Package Using FoodSaver Bottle Stoppers
THE FOODSAVER USER MANUAL
22
3 Set the Sealing Adjustment
Switch to “1” or “2.”
4 Vacuum package as per instruc-
tions on page 10, steps 6-8.
5 Remove the Accessory Hose
from the Bottle Stopper by gently
twisting the gray hose fitting and
pulling up.
How to Remove the FoodSaver Bottle Stopper
To remove a FoodSaver Bottle Stopper, simply twist and pull up
on the Bottle Stopper to release the vacuum.
IMPORTANT: Remember to remove the Accessory Hose from the
Accessory Port on the appliance before you vacuum package in
FoodSaver Bags. Remove the hose by gently twisting the gray
fitting while pulling it out. Never yank or tug the hose as this
may damage both the hose and the fitting.
FoodSaver Bottle Stoppers are the best way to keep wine, oils and
non-carbonated bottled liquids fresh longer. You will keep their
delicate taste from going stale by not exposing the liquids to air.
FoodSaver Bottle Stoppers are not to be used with plastic bottles.
Also, do not use with any carbonated or sparkling beverages.
Carbonation happens under pressure. A vacuum removes this
pressure, releasing the bubbles and causing the beverages to
become flat.
1 Insert the Bottle Stopper into the neck of the bottle. Leave at
least one inch between the contents and the bottom of the
Bottle Stopper.
2 Insert one end of the Accessory
Hose into the Accessory Port on
the appliance. Insert the other end
of the Accessory Hose into the hole
on the top of the Bottle Stopper.