Toastmaster 1135 Blender User Manual


 
7.
Hot Ingredients
NOTE: When processing hot foods, always remove the measuring cup
from the cover before beginning.
To prevent excessive heat expansion, remove measuring cup from
cover before adding hot ingredients.
Crushing Ice
1. Follow steps 2-5 in USING YOUR BLENDER.
2. Fill glass blending jar with 2 cups of ice cubes.
3. Place cover assembly on glass blending jar.
4. Press the HIGH SPEED button.
5. Press the ICE CRUSH button. Ice can be crushed by continuous
operation or by pulsing the ICE CRUSH button until desired
consistency is reached.
6. When finished, press STOP button and turn ON/OFF switch to
OFF position (O). Unplug appliance.
7. Remove glass blending jar from blender motor housing.
Operating Instructions: Chopper
IMPORTANT
Always unplug before disassembling.
The blades are very sharp; avoid touching them.
Keep the appliance out of children’s reach.
Never immerse the gearbox into water or any other liquid.
The gears inside the chopper are lubricated. Do not re-oil.
The chopper does its work in seconds. NEVER USE IT FOR
EXTENDED PERIODS.
If food collects against the sides of the chopper bowl while
operating, switch off, unplug, take off the chopper lid and adjust
the food towards the blades with a spatula.
The chopper attachment is NOT suitable for chopping hard
spices, coffee beans, ice cubes or rice.
It is recommended that the glass blending jar should be used for
mixing liquids.
TMR_1135&1135CAN_IB_25-11-04 11/25/04 3:39 PM Page 7