Filter
Top Products
8.
How to Use: Chopper
1. Place the motor housing on a dry level surface.
2. Make sure the ON/OFF Switch located at the back of the motor
housing is turned to the OFF position (O), see Figure 5.
3. Insert the gear box in the motor housing aligning the tabs with
the grooves until it fits securely.
4. Place the chopper bowl on the gear box. Align the tabs with the
grooves and turn counterclockwise until it locks into place.
5. Place the chopper blades into the chopper bowl.
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
6. Add the ingredients to the chopper bowl. Re-cut the larger parts
of foods into pieces of 1”-2”.
7. Put the chopper lid on the chopper bowl, push down and turn
until locked, see Figure 7. Make sure the chopper lid fits as shown
on Figure 7. If the appliance shakes initially due to unequal
distribution of the food in the chopper bowl, put your hand on
the chopper lid.
8. When you have finished processing the food, switch off the motor,
unplug and detach the chopper lid by turning. Remove the
chopper bowl from the gear box motor housing before emptying
the chopper bowl.
Do
◆ Always place liquid ingredients into the glass blending jar first,
unless recipe directs otherwise.
◆ Most foods require only seconds, not minutes, to process.
◆ Blend small amounts of solid food at a time for best results.
◆ Break or cut food into uniform 1”-2” size pieces and hard fibrous
food into uniform
1
⁄
2
” pieces before processing. This will allow the
food to drop down around the blades for faster, more thorough
chopping action.
◆ Always place chopper lid on chopper bowl before turning chopper
on to prevent splattering.
◆ To add foods while blender is operating, remove small clear lid
insert on lid and slowly add ingredients.
12-Speed Blender Chopper Combo Use and Care Guide
TMR_1135&1135CAN_IB_25-11-04 11/25/04 3:39 PM Page 8