Toastmaster 1195 Bread Maker User Manual


 
26
Problem Solution
Sunken Loaf with top or sides that have caved in could be caused by too much
moisture. Reduce the liquids by 1 to 2 tablespoons the next time you
make the recipe.
If recipes call for fruit or vegetables, drain well and pat them dry.
SERVICE INFORMATION
Please refer to warranty statement to determine if in-warranty service applies.
This appliance should be serviced by properly trained appliance repair technicians. Consult
your local phone directory yellow pages under “Appliances—Household—Small—Service and
Repair” for your nearest Toastmaster authorized service center or call 1-800-947-3744.
If an authorized service center is not available locally, your appliance may be returned postage
prepaid to our National Service Center at the address shown on the back of this book.
Products must be adequately protected to avoid shipping damage for repair or replacement at
our option. We suggest you surround your appliance with three inches of protective padding.
Please include a note explaining the problem you have experienced—it helps us to properly
service your product and speed its return to you.Product must be returned postage prepaid and
we recommend insuring your package.
PROPER CARE AND CLEANING
Unplug the power cord and allow the breadmaker to cool completely.
Caution: Do not pour water into the inner case or submerge the breadmaker in water.
Use only a mild detergent to clean the breadmake r.To avoid damaging the smooth surfa c e s
of the breadmaker and bread pan, do not use chemical liquid cleaners (such as benzene
or thinners), nonabrasive or abrasive cleaners, or scrubbing brushes or pads to clean the
breadmaker or bread pan surfaces.
The Unit Body, Lid and Inner Case
Wipe the outside of the unit body and lid with a damp cloth after each use,
Remove any flour, bread crumbs or other materials from the inside of the inner case using
a damp sponge or cloth or a small, portable vacuum cleaner.
The Bread Pan and Kneading Blade
Both the bread pan and the kneading blade are coated with a nonstick surface. Do not use
any cleaners or utensils that could scratch this surface.
The nonstick surface may change in appearance after continued use. This is caused by
moisture and steam and has no effect on its use or quality.
*
*