Filter
Top Products
6
SETTING THE CLOCK
1. Plug unit into 120V ~ 60Hz outlet. 12:00 will show on the display and
the colon will blink.
2. Press and hold the STOP/CLOCK SET button for five seconds. The
minutes will flash in the display.
3. Press the UP ARROW or DOWN ARROW to select the minutes.
4. Press the STOP/CLOCK SET button. The hours will flash in the display.
5. Press the UP ARROW or DOWN ARROW to select the hour.
6. Press the STOP/CLOCK SET button. The time will now be displayed
and you will exit the clock setting mode.
NOTE: The clock does not have to be set before using the oven. Just
push function buttons, select cooking time(s), then START.
BEFORE FIRST USE
1. Unwrap product and remove any packaging materials that may have
been included to prevent damage during shipping.
2. Place on a flat, stable surface.
3. Before using for the first time, the cooking basket and drip tray should
be washed with warm soapy water. Rinse and dry.
4. Insert drip tray (Fig. 1). Always have drip tray in place before using
(Fig. 2).
5. Read instruction book thoroughly to become familiar with the
UltraVection
™
Oven.
6. A slight odor or smoking from the interior of the UltraVection
™
Oven
may be noticed when first using. This is normal due to residues
from manufacturing.
USING YOUR OVEN
The UltraVection
™
Oven cooks using super heated air movement. Therefore,
the outside of the oven and the glass door become hot. Always use caution
when touching these parts and never use the top of your oven as a
resting-place for anything. We recommend using a potholder or
insulated mitt to remove the air surround basket after cooking.
Always preheat oven before using unless chart or recipe indicates
otherwise.
W
A
R
M
T
O
A
S
T
Fig. 1
Fig. 2