Filter
Top Products
9
6. Slide drip tray back into the oven and replace the food basket.
7. Clean exterior with clean damp cloth and dry thoroughly after each
use.
NOTE: Do not use without drip tray in place.
Any servicing requiring disassembly other than the above cleaning must be
performed by an authorized service center.
BULB REPLACEMENT
1. Unplug unit and allow oven to cool completely.
2. Remove the one screw securing the small cover
plate in back of unit.
3. Remove bulb by turning.
4. Replace with new 25 watt bulb (P/N 21270E).
5. Replace the cover and secure with screw.
Any service requiring disassembly, other than the cleaning described pre-
viously, must be performed by a qualified electrician.
STORAGE
• Be sure the UltraVection
™
Oven is completely cool before storing.
• All parts should be thoroughly cleaned and dried.
• Always store with basket in place.