Filter
Top Products
STEAMER
ASSEMBLY
STEP
1
-
ATTACHING
THE
ROD
A.
Set the appliance on
a
steady surface.
B. The Rod is shipped in a collapsed position and
must be extended for use. Take the Rod and
loosen the Top Knurled Knob slightly by
rotating it counter
-
clockwise. Grab the
Rod
by
the
Hook
Mount and extend fully (about
18
inches). Tighten the
Top
Knurled Knob.
Similarly loosen the Bottom Knurled Knob and
extend the middle section of the Rod and
retighten.
D.
Loosen the Rod Base by turning it counter
clockwise several turns. Insert the bottom
of
the
Rod and press down firmly. Hand-tighten the
Rod Base
by
turning clockwise.
Place the
Dual
Hook Hanger over the
Hook
Mount and hand-tighten with clockwise turns.
C.
E.
STEP
2
-ATTACHING
THE
STEAMER
HOSE
A.
Screw the end of the steamer hose with the
knurled
knob
onto the threaded pipe on the
top
of
the steamer unit. (Caution:
Do
not use
excessive force in tightening the knob
)
B.
Tighten by hand until it no longer turns.
C.
Hang the nozzle from the large hook on the
Dual Hook Hanger.
P.
5