Filter
Top Products
Drain the unit by removing the drain plug
(located at the side of the main unit
-
see
P.4
#1
1).
This will allow contents of the
reservoir (main unit) to drain. Tipping the
unit in the direction of the drain plug to
remove any remaining water. Replace the
drain plug.
Using distilled water will eliminate a
residue build up usually found in tap water.
CLEANING
AND
STORING
1.
Turn the
ON/OFF
switch to the
OFF
position and unplug from the power
source.
2.
Wait for the steamer to cool
completely
for at least
30
minutes.
3.
Remove and drain the water container.
Drain the unit
by
removing the drain
plug and allowing the contents
of
the
reservoir to drain. Tip the unit in the direction
of the drain
plug
to
remove remaining
water. Replace
the
plug.
4.
Remove the steamer hose
and
hanger
rod.
5.
Remove the Water
Tank.
6.
Remove excess water from the reservoir
by
lifting the unit and pouring. Flush the
reservoir area with fresh water to clean
any residue
from
the water source.
valve
.
7.
Reattach the hose, hanger rod and water
container and store the unit.
P.
8