Filter
Top Products
12
Functional specifications
Model T1-16S Standard version T1-16S Enhanced version
Control method Stored program, cyclic scan system
Scan system Floating scan or constant scan (10 to 200ms, 10ms units)
I/O update Batch I/O refresh (direct I/O instruction available)
Program memory RAM (capacitor back-up) and EEPROM (no back-up battery required)
RAM memory buck-up
1 hour at 25°C by built-in capacitor,
2 years at 25°C by optional battery
Program capacity 8K steps (4K or 8K mode)
Programming language Ladder diagram with function block
Instructions Basic: 21, Function: 97
Execution speed
1.4µs/contact, 2.3µs/coil, 4.2µs/16-bit transfer, 6.5µs/16-bit addition
Program types 1 main program
1 sub-program (initial program)
1 timer interrupt (interval: 5 to 1000ms, 5ms units)
4 I/O interrupt (high-speed counter and interrupt input)
256 subroutines (up to 3 levels of nesting)
I/O capacity Main unit: 16 points (8 inputs/8 outputs)
Expansion I/O: Up to 8 I/O modules (expandable up to 144 points)
User data I/O register 512 points/32 words (X/XW, Y/YW)
Auxiliary relay 4096 points/256 words (R/RW)
Special relay 1024 points/64 words (S/SW)
Timer 256 points (T./T), 64 @ 0.01s & 192 @ 0.1s
Counter 256 points (C./C)
Data register 4096 words (D)
Index register 3 words (I, J, K)
Real-time-clock/calendar No
Yes, (±60s/month)
Special I/O functions High speed counter (2 single or 1 quadrature) or Interrupt input (2 points),
Adjustable analog register (2 points),
Pulse output (CW+CCW or pulse+direction) or PWM output
Communications interface 1 port of RS232C (programmer port) ... Programmer or Computer link protocol
−
1 port of RS485
- Computer link mode
(Programmer or Computer),
- Data link mode,
- Free ASCII mode,
- Inverter (VF-A7/S9) connection mode
TOSLINE-F10 remote (by using TOSLINE-F10 module)
Debug support function Sampling trace (8 devices and 3 register - 256 times)
On-line programming (at 4K mode)
On-line EEPROM write
S
pecifications