Filter
Top Products
6
SCADA System / Remote Programming
The T1-16S enhanced version has a built-in RS485 communication port. By using this
communication port, up to 32 T1-16Ss can communicate with a computer or other higher-level
controller. Most major SCADA software supports T-series PLC communication protocol. A DDE
server software (T-PSV) is also available.
When using the T-series programming tool (T-PDS) in this configuration, each station can be
programmed remotely. A multi-drop adapter (CU111) allows an enhanced T1-16S to have two
RS485 ports or for a standard T1-16S to have remote capability added after installation.
Easy Data Linkage between Two T1-16Ss
The T1-16S enhanced version's RS485 port supports the data link mode. Using the data link
mode, two T1-16Ss can exchange data each other (16 words input and 16 words output). The
update cycle for the total 32 words is approx. 50ms. No user program required for this data
linkage.
C
ommunication Features
SCADA system (DDE server is also available)
Remote programming (T-PDS)
RS485
Max 1km
M
ax 32 T1-16S
R
S485
Max 1km
Operator Side
T1-16S
Machine Side
T1-16S
Programmer port
(RS232C)
This function is available in any combination of
T1-16S, T1-40S, T2E, or T2N.