Filter
Top Products
9
Handy Programmer (HP911A)
The HP911A is a hand-held graphic programmer. Its
portability makes it ideal for maintenance use at remote
locations. The HP911A has all the features of a full size
programming terminal. (2 m cable for T1-16S is included)
♦ Ladder logic programming of T-series programmable
controllers T1/T1S, T2/T2E/T2N and T3. (other than
T3H and S2T)
♦ Built-in EEPROM allows program copy between T-
series controllers.
♦ Two display modes,
- Normal: 5 lines and 12 columns
- Zoom: Full device description
♦ Data monitor for I/O and internal registers.
♦ On-line data set & I/O force.
♦ Backlit LCD display for better operation in dim light.
Program Storage Module (RM102)
The RM102 is an external memory device, which can
store T-series ladder logic programs for T1/T1S,
T2/T2E/T2N, T3/T3H and S2T controllers.
By using the RM102, program transfer from a master T1-
16S can be easily done without the need for a computer
or hand held programmer. Two-button operation makes
program load/save accessible for anyone. However, if a
password is used in the T1-16S, the password in the
RM102 must match before a program load can be
executed.
Multi-drop Adapter (CU111)
The CU111 is an RS232C/RS485 converter, which
enables the T1/T1S programmer port to be linked with a
master computer. By using the CU111, up to 32 T1/T1Ss
can be connected to a master computer or higher level
controller. The T1-16S standard version (without built-in
RS485 port) can be linked via RS485 using the CU111.
The master computer can run a SCADA, HMI or DDE
Server software. The T-PDS programming software can
also be used through the RS485 link to program or
monitor each individual T1/T1S. (see diagram on page 6)
Note:
Some T1-16S functions are limited with using the HP911A.