Filter
Top Products
4
T1-16S Main Unit
There are four types of T1-16S controllers depending on the built-in functions and the power
supply voltage.
Type Description
TDR116S6C
Standard version, 100-240Vac power
TDR116S6S
Enhanced version, 100-240Vac power
(with Real-time clock and RS485 port)
TDR116S3C
Standard version, 24Vdc power
TDR116S3S
Enhanced version, 24Vdc power
(with Real-time clock and RS485 port)
I/O Modules
The following types of I/O modules are available. A maximum 8 I/O modules can be connected to
each T1-16S controller.
Type Description
TDI116M∗
∗∗
∗S
16 points 24Vdc input, 5mA
(Note)
TDD116M∗
∗∗
∗S
8 points 24Vdc input, 5mA
8 points 24Vdc output, 100mA
(Note)
TDO116M∗
∗∗
∗S
16 points 24Vdc output, 100mA
(Note)
TRO108M∗
∗∗
∗S
8 points relay output, 240Vac/24Vdc, 1A
TAD121M∗
∗∗
∗S
1 channel analog input, 0 to 5V/0 to 20mA,
12-bit resolution, internal-external isolation
TAD131M∗
∗∗
∗S
1 channel analog input, -10 to 10V,
12-bit resolution, internal-external isolation
TDA121M∗
∗∗
∗S
1 channel analog output, 0 to 20mA,
12-bit resolution, internal-external isolation
TDA131M∗
∗∗
∗S
1 channel analog output, -10 to 10V,
12-bit resolution, internal-external isolation
TTC111M∗
∗∗
∗S
1 channel thermocouple input, type E, J, K,
12-bit resolution, internal-external isolation
TFR112M∗
∗∗
∗S
TOSLINE-F10 remote station, 250K/750Kbps,
1 word input + 1 word output
Note: Cable side connector is not included with the DI, DO, or DD type module.
Order connectors separately. (PT15S or PT15F)
C
onfiguration